How to set up the DJI Ronin-S and balance your camera on the gimbal
- Attach the base plate to the camera
- Attach the battery grip to the mini tripod and place on a flat surface
- Slide in the gimbal and lock the lever on the side
- Loosen the axis arms screws and unfold the gimbal arms so they can be moved freely
- Slide the camera into position on the gimbal plate
- Hold the Roll Axis motor in position and find the centre balance for the camera by sliding backwards and forwards and then use the lever to lock in place
- Tilt the camera up, so the lens is pointing upwards and adjust the Tilt arm until you find balance
- Rotate the camera, so the lens points forwards and adjust the horizontal position of the camera on the tilt arm, then readjust camera position if needed
- Rotate the Roll axis and adjust the arm to find balance, once found you should be able to roll the arm, so the camera stays in position without rotating back to the start position
- Tilt the Ronin-S at 45º and adjust the Pan arm, so the camera finds balance on the Pan rotation.
- Sit the Ronin-S back on the flat surface and power up the battery grip then gimbal and wait for the beep
- Download the Ronin App and make sure BlueTooth is switched on
- Start the app and follow the connection instructions
- From the main screen click Configuration / Motors / Auto Tune
- Your now ready to start using the DJI R
https://camerajabber.com/